What to charge as a self-employed electrician: Canadian rates and a pricing formula

Self-employed electricians in Canada typically charge around 50 to 90 dollars an hour, or a day rate of roughly 400 to 560 dollars, with major cities and emergency work running higher. But the rate you quote is not the money you keep. Set your price from your costs and target take-home, not from what the contractor across town is charging.

This guide is for the person running the business, not the homeowner getting a quote. It gives you the benchmark rates, then the math nobody publishes: how to work backward from the take-home you want to the day rate you actually need to charge.

What self-employed electricians charge in Canada

Here are the going rates across Canada, as benchmarks to price against rather than fixed figures. They move with province, specialty, certification and how urgent the work is. Emergency and after-hours work carries a clear premium; routine residential work sits at the lower end.

Treat these as the going rate, not your rate. The benchmark tells you whether you are roughly in the right area. It does not tell you whether the number actually covers your costs and pays you a wage, which is the part that matters and the part the rest of this guide works out.

Headline rate vs effective hourly rate

The figure you quote a customer and the figure you actually earn per working hour are two very different numbers. Quote 75 dollars an hour and you might assume a 40 hour week brings in 3,000 dollars. It does not, because you cannot bill 40 hours.

A realistic working day is full of time you do not invoice: driving between jobs, quoting work you may not win, picking up and staging materials, parking, chasing late payments, paperwork and permits. On a typical day, two or three of your working hours never reach an invoice.

So your effective hourly rate is the headline rate spread across only the hours you actually bill. If you quote 75 dollars an hour but only bill five hours in an eight hour day, your real rate against the day is closer to 47 dollars. That gap is why so many electricians feel flat out yet never seem to get ahead.

The cost stack you have to cover

Before you set a rate, you need to know what your year costs to run. This is the part most rate articles skip, and it is the reason the going rate is a trap if you copy it blind. As a self-employed contractor, your rate has to cover all of this before a dollar becomes wage:

• Truck: loan or lease, fuel, insurance, plates, service and tires.
• Tools and test equipment, plus calibration and replacement.
• General liability insurance, and WSIB or provincial coverage where it applies.
• Licensing and certification (for example ESA contractor licensing in Ontario or Technical Safety BC) and your continuing-education upkeep.
• Materials you absorb, consumables and disposal.
• Accountant, software, phone, and a little marketing.
• The things a salaried job hands you for free: paid time off, sick days, and retirement savings.

Add it up honestly and a typical solo contractor's overhead lands somewhere around 25,000 to 35,000 dollars a year before you pay yourself anything. Take a worked mid-figure of about 30,000 dollars: that is the number your billable hours have to clear before your rate starts paying a wage.

Billable-hours reality check

Here is the number that breaks most pricing: you cannot bill 40 hours a week, and you cannot bill 52 weeks a year. Once you take out time off, the odd sick day, quoting, travel, admin and the inevitable slow patches, the hours you can actually invoice shrink fast.

Run it through honestly. Say you work a 45 hour week but only five hours a day end up billable. That is 25 billable hours a week. Take off five weeks for vacation and illness and you are left with about 47 working weeks, so roughly 1,175 billable hours in the year. Not the 1,800 or 2,000 the headline week implies.

That single fact reshapes everything. Every cost you carry, and every dollar of wage you want, has to be recovered across those 1,175 hours, not the 2,000 you are physically at work. Price as if you bill all your hours and you will fall short every year and never quite understand why.

The formula: from take-home target to day rate

Now do the math the going rate never gives you. Work backward from the take-home you actually want, not forward from a number you saw on a forum.

Start with the wage you want to clear, add the overhead you have to cover, then divide by the billable hours you can realistically bill. That is your true minimum hourly rate. Multiply by the hours in a billable day to get your day rate.

Put real numbers in. Say you want to take home 80,000 dollars and your overhead is about 30,000 dollars. That is 110,000 dollars you have to bill. Divide by 1,175 billable hours and your true rate is roughly 94 dollars an hour. Across five billable hours that is a day rate of about 470 dollars, before you have added any profit margin or buffer for a slow month.

Notice where that lands: right inside the benchmark range at the top of this guide. The going rate is not wrong as a sanity check. It is just useless as a starting point, because it does not know your costs or the take-home you are aiming at. Build the number, then check it against the benchmark, not the other way round.

Setting a service-call fee or minimum charge

A service-call fee is not greedy. It is how you stop short jobs losing you money. A 30 minute troubleshoot still costs you the drive there, the drive back, the parking and the paperwork, all of it unbillable time wrapped around a tiny billable slice.

Without a minimum charge, the small jobs quietly subsidize the customer at your expense. A sensible minimum covers your travel plus the first hour, so even a quick visit clears the cost of getting there. That is why adding one outlet can fairly run 200 dollars when the work itself took 40 minutes: the price reflects the whole trip, not the time on the tools.

Set the minimum so the smallest job you are willing to take still pays. If a job is too small to clear your minimum, it is too small to do at a profit, and you are better referring it out than losing money to look busy.

Where priced jobs actually get won or lost

You can build a perfect rate and still end the year short, because a rate only earns out on jobs you actually book. The cleanest pricing model in the world does nothing for the quote you never got to give.

And the most expensive leak in most electrical businesses is exactly that: the call that came in while you were up a ladder or wiring a panel, went to voicemail, and then went to the next electrician on Google. You priced for that work. You just never got the chance to win it. Every missed call is a free quote you handed a competitor.

That is the real reason busy does not always mean profitable. If you want more of those calls turning into booked work in the first place, our guide on how to get more electrical work covers the channels that fill the schedule, and the conversion half most marketing advice skips.

The point is not the exact rate

Your numbers will differ from the worked example above, and they should. A higher average ticket, a downtown postal code, a specialty like EV chargers or commercial, or leaner overhead all move the figure. What does not change is the method: start from the take-home you want, add what your year costs to run, divide by the hours you can honestly bill, and only then check the result against the going rate.

Run your own version this week. The benchmark table tells you whether you are in the right ballpark; the formula tells you what to actually charge; and the calls you are losing tell you why a fair rate has not turned into a fair year. For more on that last part, see how call answering for electrical contractors fits into the picture, and our roundup of the best electrician software for the tools that keep your quoting and invoicing tight.